EasyManua.ls Logo

Wolf 2 Series - Installation Dimensions CT30 E

Wolf 2 Series
62 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Electric Cooktop -2
Installation Information
2-5
Figure 2-5 CT30E Counter top Cut-Out Top View
(64)
WIDTH
COOKTOP CUT-OUT
COOKTOP
DEPTH
CUT-OUT
19-1/4” (489)
2-1/2” MIN
FRONT OF COUNTERTOP
28-2/8” (721)
Installation Dimensions (CT30E & CT30E-208)
NOTE: For complete installation information, please refer
to the Installation Guide provided with the unit.
This cooktop is designed to t a standard 33” (838mm)
width base cabinet with a 25” (635mm) deep counter
top. Before making the counter top cut-out, verify that
the cooktop will clear the side walls of the base cabinet
below. A Wolf 30” (762mm) or 36” (914mm) built-in
single oven may be installed below Model CT30E. For
this installation, unless the cabinets are deeper than 24”
(610mm), it is recommended that the electrical supply be
placed in the base cabinet to the right of the oven. (See
Figure 2-5 & 2-6)
NOTE: Do not block the cooling fan located at the bottom
of the cooktop. Minimum 5 3/4” (146mm) clearance
is required between countertop and any combustible
surface directly below the cooktop.
NOTE: Locate the junction box within reach of the 48”
(1219 mm) conduit, and accessible when the cooktop unit
is installed.
Figure 2-6 CT30E Counter top Cut-Out
*Minimum clearance from both side edges of cooktop cut-out to combustible materials up to 18” (457mm) above counter
top.
**Minimum clearance from rear edge of cooktop cut-out to combustible materials up to 18” (457mm) above counter top.
NOTE: Unit dimensions may vary to ±1/8” (3mm).
2"* min (51)
18"
(457)
(64)
36" (914)
13" max
(330)
30" (762)
24" min
(610)
3
3
/ 4 " min
(95)
10"
(254)
(89)
E
33" (838)
RECOMMENDED
CABINET WIDTH
30" min (762)
2"**
(51)
COUNTERTOP TO
COMBUSTIBLE
MATERIALS
ABOVE COOKTOP
CUT-OUT TO
COMBUSTIBLE
MATERIALS
BOTH SIDES
19-1/4” (489)
COOKTOP
CUT-OUT
DEPTH
2-1/2” min
FLOOR TO
HEIGHT
STANDARD
COUNTER
30” OVEN OPENING
28-3/8” (721) COOKTOP
CUT-OUT WIDTH
4”
(102)
3-1/2”
NOTE: Installations of International units require taking
the extra space required for the Terminal Box into
consideration.

Other manuals for Wolf 2 Series

Related product manuals