Rev AB Safety Warnings for Wolke m600 touch Printer 2-5
Wolke m600 touch Operator Manual
PERSONAL INJURY. Read and understand the MSDS before using
the ink. An MSDS exists for each type of ink. The appropriate
sheet(s) are supplied along with the shipped product.
Ensure that you retain all MSDSs for future reference in case you
need to consult a physician regarding an ink-related accident.
Additional copies of MSDSs are available upon request, and can be
obtained by contacting the Wolke Customer Service Department at
+49 (0) 9151 8161-20. Outside Germany, customers should contact a
subsidiary Wolke office or their local Wolke distributor.
Safety Warnings for Wolke m600 touch Printer
Some additional warnings that are specific to the Wolke m600 touch
printers are described in this section.
Grounding and Bonding
PERSONAL INJURY. Always prevent static discharge from
occurring. Use proper Grounding and Bonding methods. Always
bond conductive equipment together with approved cables to
maintain them at the same potential and minimize static discharge.
Only use Wolke approved metallic service trays and ground cables.
Electrical Power
PERSONAL INJURY. This equipment must be installed with a
locally positioned mains supply isolation device. This can be either a
plug and socket or a switch connector or circuit breaker in
accordance with IEC 60947-3 or IEC 60947-2.
To Next Page
Loading...