wolke M600 - Using the Tools Page

Rev AB Using the Tools Page 4-3
Wolke m600 touch Operator Manual
• System Control Buttons: Permits the user to switch off or switch on
the printer.
• Home Button: Permits the user to access the Home screen as shown in
Figure 4-1.
• Job Select Button: Permits the user to select the required job from the
list.
Using the Tools Page
Touch the Tools icon on the home page to access the tools page
(Figure 4-2).
The Tools page allows the user to access the following pages:
• Setup Page: Permits the user to modify a small subset of the printer
setup parameters
• Diagnostics Page: Provides on-line fault finding routines and
diagnostic functions
• Databases page: Provides control over the jobs database of the printer.
Figure 4-2: Tools Page