Operation
HMI Display
1
1-9 G28doc072321 Operation
10. Debarker status 1-ON / 0-OFF.
11. Intake Manifold Air Pressure.
12. Engine working hours.
13. Press to switch between the day and night modes.
14. Press to enter engine error screen See Section Engine error screen
.
15. Press to enter diagnostic screen - for service purposes only. Access is password pro-
tected.
Screen #4
1. Switching between day and night brightness settings. Use “-” and “+” buttons to change
the percentage value of brightness.
2. This button saves the selected brightness value.
3. Back to the #3 screen.
FIG. 1-7
To Next Page
Loading...
