Maintenance & Troubleshooting
Cable Chain Repair
2
2-2 ROdoc070822 Maintenance & Troubleshooting
2.2 Cable Chain Repair
If a component of the cable chain breaks or is missing, replace the component.
CAUTION! Do not operate the remote sawmill if the cable
chain is damaged or components of the chain are missing.
The chain components are interlocking and continued
operation will cause more damage to the chain.
See Figure 2-1. To disassemble the chain use a screwdriver to pry the connecting links
apart. After removing the connecting links, the side plates can be disassembled by pulling
them apart at an angle.
FIG. 2-1
To Next Page
Loading...
Need help?
General
