Maintenance & Troubleshooting
Clean The Cable Chain & Support Tray
Maintenance & Troubleshooting ROdoc070822 2-1
2
SECTION 2 MAINTENANCE & TROUBLESHOOTING
2.1 Clean The Cable Chain & Support Tray
As you operate the sawmill, be aware of any pieces of debris that may fall on the cable
chain and/or support tray. Stop the sawmill and immediately remove any pieces of wood,
bark or anything else that may divert the path of the chain or cause it to jam.
Clean the cable chain and support track of sawdust buildup every eight hours of
operation. Blow or brush the sawdust from the track and tray and remove any
accumulated sawdust that is high enough to contact the chain/tray.
To Next Page
Loading...
Need help?
General
