Wood-mizer LT70 User Manual

Maintenance & Troubleshooting
Cable Chain And Support Tray Alignment
2
2-4 ROdoc070822 Maintenance & Troubleshooting
2. The chain support tray must be level to prevent premature wear of the chain. Use a
square to check the angle of the tray to the sawmill frame. Check at several locations
along the length of the tray.
See Figure 2-3.
Bend the tray up or down as necessary to square it to the sawmill frame.
FIG. 2-3
3H0508B
Front End View of
Remote Chain
90°
Front end view of
remote chain

Wood-mizer LT70 Specifications

General

Brand	Wood-mizer
Model	LT70
Category	Construction Equipment
Language	English