Wood-mizer LX150 - Safety Symbols and Signal Words; Safety Instructions and Owners Responsibility

Safety
Safety Symbols
2
2-5 WM doc 4/15/21 Safety
SECTION 2 SAFETY
2.1 Safety Symbols
The following symbols and signal words call your attention to instructions concerning your per-
sonal safety. Be sure to observe and follow these instructions.
DANGER! indicates an imminently hazardous situation which, if not
avoided, will result in serious injury or death.
WARNING! suggests a potentially hazardous situation which, if not
avoided, could result in serious injury or death.
CAUTION! refers to potentially hazardous situations which, if not avoided,
may result in minor or moderate injury or damage to equipment.
NOTICE: indicates vital information.
NOTE: gives helpful information.
2.2 Safety Instructions
OWNER’S RESPONSIBILITY
NOTICE: The procedures listed in this manual may not include all ANSI,
OSHA, or locally required safety procedures. It is the owner/operator’s
responsibility and not Wood-Mizer Products to ensure all operators are
properly trained and informed of all safety protocols. Owner/Operators are
responsible for following all safety procedures when operating and per
-
forming maintenance to the Sawmill.
NOTE: ONLY safety instructions regarding personal injury are listed in this
section. Caution statements regarding only equipment damage appear
where applicable throughout the manual.
OBSERVE SAFETY INSTRUCTIONS
NOTICE: Read the entire Operator's Manual before operating the sawmill.
Take notice of all safety warnings throughout this manual and those
posted on the machine. Keep this manual with this machine at all times,
regardless of ownership.
Also read any additional manufacturer’s manuals and observe any appli-
cable safety instructions including dangers, warnings, and cautions.
Only persons who have read and understood the entire operator's manual
should operate the sawmill. The sawmill is not intended for use by or
around children.