Safety
Electrical Lockout Procedures
Safety WM doc 4/15/21 2-10
2
WARNING! Keep hands, feet, and other objects away from the sawdust
chute when operating sawmill. Failure to follow this may result in serious
injury or death.
CAUTIONS FOR GAS OR DIESEL ENGINE OPERATION
DANGER! Operate your engine/machine only in well ventilated areas.
Failure to follow this will result in serious injury or death.
WARNING! Never operate an engine with a fuel or oil leak; combustibles
may come in contact with hot surfaces and ignite into flames. Failure to fol-
low this may result in serious injury or death.
WARNING! Do not operate engine without proper and operational spark
arrester/muffler. Sparks emitted from the engine exhaust could ignite sur
-
rounding materials. Failure to follow this may result in serious injury or
death.
KEEP SAFETY LABELS IN GOOD CONDITION
NOTICE: Always be sure that all safety decals are clean and readable.
Replace all damaged safety decals to prevent personal injury or damage
to the equipment. Contact your local distributor, or call your Customer Ser
-
vice Representative to order more decals.
NOTICE: If replacing a component which has a safety decal affixed to it,
make sure the new component also has the safety decal affixed.
USE CAUTION WHEN WORKING WITH HEAVY LOGS
WARNING! Always make sure log is clamped securely before sawing.
Failure to follow this may result in serious injury or death.
UP/DOWN SYSTEM SAFETY
WARNING! Secure the saw head with a chain rated at least 1900 lbs.
working load capacity before adjusting the up/down chain to prevent falls.
Failure to follow this may result in serious injury or death.
2.3 Electrical Lockout Procedures
RULES FOR USING LOCKOUT PROCEDURE
The sawmill shall be locked out to protect against accidental or inadvertent operation when such
operation could cause injury to personnel. Do not attempt to operate any switch or valve bearing
a lock.
To Next Page
Loading...
