Sawmill Assembly
Assemble the log bed
3
3-8 WMdoc041521 Sawmill Assembly
See Figure 3-4.
Assemble the log bed
WARNING! Use a minimum of two people to remove
the bed sections from the packing crate. Failure to fol-
low this may result in serious injury.
1. Unbolt the next bed section from the shipping strap and remove. (Do
not unbolt all the sections at once to prevent inadvertent movement.)
2. Apply the bed legs to the sections as shown in Figure 3-5.
See Figure 3-5.
FIG. 3-4
FIG. 3-5
Hex Nut, M20
4 legs per bed
section
To Next Page
Loading...
