Audemat Control Silver v.2.1.x User Manual – 06/2015
Page 35
Head Office : Parc d’activites Kennedy - 20, avenue Neil Armstrong – 33700 Bordeaux-Merignac (France)
Tel +33 (0)5 57 928 928 – Fax +33 (0)5 57 928 929 – contact@worldcastsystems.com – www.worldcastsystems.com
4.12. SNMP Agent
SNMP configuration
The equipment enables multiple addresses to be configured for SNMP notifications. However, only the
Main Manager has the authority to acknowledge notifications. With “INFORMS” messages, automatic
answers from secondary managers are ignored by the unit.
SNMP Traps configuration
SNMP Notification Type / Trap Community / System Description: trap settings
Life Sign Trap / Minutes between Life Signs: sends life signs every X minutes. This trap makes it possible to
check that the unit is connected to the network.
Trap sending test: enables the user to carry out a test according to the trap settings.
4.12.1. Supported SNMP versions
The unit implements an SNMP agent conforming to SNMPv1 and SNMPv2c versions. GET and SET commands are
supported, as well as GETBULK in SNMPv2c. Notifications can be transmitted in TRAP V1 or V2c form or with an
INFORM V2c type.
4.12.2. Notification mode
To make sure traps are received by the main recipient, the unit offers 2 methods. With both methods, traps are
sent until they are acknowledged.
To Next Page
Loading...