Audemat Control Silver v.2.1.x User Manual – 06/2015
Page 43
Head Office : Parc d’activites Kennedy - 20, avenue Neil Armstrong – 33700 Bordeaux-Merignac (France)
Tel +33 (0)5 57 928 928 – Fax +33 (0)5 57 928 929 – contact@worldcastsystems.com – www.worldcastsystems.com
6. BASIC AUDIO BACKUP
6.1. Working principle
With its two audio inputs and its audio outputs, the Audemat Control Silver can become an audio backup solution.
With ScriptEasy, the presence of audio on one of the audio inputs can be detected.
In case of loss of audio, an audio file previously associated with the audio output can then be played.
Several steps are necessary to implement this solution.
6.2. Audio file management
A single audio file must be in wav or mp3 format with a 44.1 kHz sampling rate.
To be recognized by the Audemat Control Silver its name has to be audiobackup.wav or
audiobackup.mp3.
The audio file needs to be uploaded on the Audemat Control Silver microSD card.
o Use an FTP client such as FileZilla (freeware) and connect with the music FTP account (default
user name and password: music / music; see section 4.4 for us er account management).
Copy the file at the root (default directory).
OR:
o Copy the file to the microSD card using a computer and a card reader. Please be aware that the
card is in FAT format
The play time of audio backup file depends on its size and its compression; the file will loop until audio backup is
disabled.
6.3. ScriptEasy
By default the audio backup is the ‘play’ mode.
Open ScriptEasy, connect to the Audemat Control Silver and create a new script or use one of the sample scripts to
manage the audio file (see section 5).
To Next Page