Xantrex Freedom XC 2000 User Manual

Maintaining the Freedom XC Unit
70 Freedom XC Owner's Guide
Maintaining the Freedom XC Unit
WARNING
ELECTRICAL SHOCK HAZARD
Turning the Power k button to Standby does not disconnect DC
battery power from the Freedom XC. You must disconnect from all
power sources before working on any circuits connected to the unit.
Failure to follow these instructions can result in death, serious
injury, or equipment damage.
Periodically you should:
n With all sources of power off, clean the exterior of the unit
with a damp cloth to prevent the accumulation of dust and
dirt.
n Ensure that the DC cables are secure and fasteners are
tight.
n Make sure the ventilation openings are not clogged.

Xantrex Freedom XC 2000 Specifications

General

Continuous Power	2000W
Surge Power	4000W
Input Voltage	12V DC
Output Voltage	120V AC
Output Frequency	60 Hz
Waveform	Pure Sine Wave
Efficiency	90%
Operating Temperature	-4°F to 140°F (-20°C to 60°C)
Transfer Time	20ms