Xantrex Freedom XC 2000 User Manual

Operating During Transition Between Grid Mode and Battery Mode
64 Freedom XC Owner's Guide
Custom Battery Settings Menu
NOTICE
REVERSE POLARITY
To avoid damaging your batteries during charging or
equalization, consult your battery manufacturer and associated
documentation before setting a custom battery type.
Failure to follow these instructions can result in equipment
damage.
Custom battery type can be selected by the setting number 20
(see Custom Battery Settings Menu on page 64). After the custom
battery is selected, you can then adjust the value of custom
absorption (setting number 22) and custom float (setting number
23) accordingly.
Operating During Transition
Between Grid Mode and Battery
Mode
The Freedom XC’s advanced power management is capable of
transitioning power from an AC source to DC source within a
fraction of a second and vice-versa.
The Freedom XC automatically detects when shore power is
present and when it becomes unavailable or drops to less than
106volts AC.
The transfer time can be set to two settings. For details see
Adjusting Settings in Configuration Mode on page 51.
NOTICE
EQUIPMENT DAMAGE
l
When the transfer mode is set to UPS, connect only
sensitive digital equipment that requires fast AC transfer
times.
l
Appliances with motors, compressors, and heating
elements do not require a transfer mode of UPS. Set APL for
these devices to avoid damaging the transfer relay.
Failure to follow these instructions can result in equipment
damage.

Xantrex Freedom XC 2000 Specifications

General

Continuous Power	2000W
Surge Power	4000W
Input Voltage	12V DC
Output Voltage	120V AC
Output Frequency	60 Hz
Waveform	Pure Sine Wave
Efficiency	90%
Operating Temperature	-4°F to 140°F (-20°C to 60°C)
Transfer Time	20ms