Xerox AltaLink C8130 Series User Manual

1. At the high capacity feeder, squeeze the handle, and pull out Tray 6 until it stops.
2. Open the side gate. Remove the screw that holds the spacer plate at the back of the tray, then lift the spacer
plate out of the tray. Repeat the procedure for the spacer plate at the front of the tray.
3. For the rear spacer plate, place the tabs at the bottom of the plate into the slots that correspond with the
correct paper size. Slide down the spacer plate, then engage the peg on the top of the tray with the matching
hole in the spacer plate. To secure the spacer plate, install the screw. Repeat the procedure for the spacer plate
at the front of the tray.
Xerox
®
AltaLink
®
C8130/C8135/C8145/C8155/C8170 Series Color Multifunction Printer User Guide 207
Paper and Media

Xerox AltaLink C8130 Series Specifications

General

Maximum Paper Capacity	5, 140 sheets
Copy Resolution	Up to 600 x 600 dpi
Fax	Optional
Scan Resolution	Up to 600 x 600 dpi
Duplex Printing	Automatic
Memory	4 GB
Type	Color Multifunction Printer
Fax Resolution	Up to 400 x 400 dpi
Display	10.1-inch color touchscreen
Print Speed	Up to 30 ppm
Connectivity	Ethernet, USB 3.0
Hard Drive	320 GB (optional)
Functions	Print, Copy, Scan, Fax (optional)
Copy Speed	Up to 30 cpm (black/white and color)
Mobile Printing	Apple AirPrint, Google Cloud Print, Mopria, Xerox Print Service Plug-in for Android
Dimensions	640 x 699 x 1, 147 mm
Print Resolution	Up to 1200 x 2400 dpi