Printing on Special Paper
To order paper, transparencies, or other media, contact your local reseller or go to www.xerox.com/office/supplies.
For reference:
www.xerox.com/rmlna : Recommended Media List (United States)
www.xerox.com/rmleu : Recommended Media List (Europe)
ENVELOPES
You can print envelopes from the Bypass Tray. When the optional Envelope Tray is installed, you can print envelopes
from Tray 1.
Guidelines for Printing Envelopes
• Use only paper envelopes.
• Do not use envelopes with windows or metal clasps.
• Print quality depends on the quality and construction of the envelopes. If you do not get the desired results, try
another envelope brand.
• Maintain constant temperatures and relative humidity.
• Store unused envelopes in their packaging to avoid excess moisture and dryness which can affect print quality
and cause wrinkling. Excessive moisture can cause the envelopes to seal before or during printing.
• Remove air bubbles from the envelopes before loading them into the tray by setting a heavy book on top of the
envelopes.
• In the print driver software, select Envelope as the paper type.
• Do not use padded envelopes. Use envelopes that lie flat on a surface.
• Do not use envelopes with heat-activated glue.
• Do not use envelopes with press-and-seal flaps.
Loading Envelopes in the Bypass Tray
For supported envelope sizes, refer to Supported Paper.
To load envelopes in the Bypass Tray:
Xerox
®
AltaLink
®
C8130/C8135/C8145/C8155/C8170 Series Color Multifunction Printer User Guide 219
Paper and Media
To Next Page
Loading...
Need help?
General
