Xerox AltaLink C8130 Series User Manual

6. To engage the fine-adjustment block, pinch the levers and slide the guides inward.
LOADING PAPER IN TRAYS 3 AND 4 OF THE TANDEM TRAY MODULE
The control panel displays a warning message when the paper in the tray is in short supply, or when a tray is empty.
To change the paper size in Trays 3 and 4, refer to Configuring Trays 3 and 4 of the Tandem Tray Module.
To load the paper in Trays 3 and 4 of the Tandem Tray Module:
1. Pull out the tray until it stops. Wait for the tray to lower and stop.
2. Fan the edges of the paper before you load it into the paper trays. The procedure separates any sheets of
paper that are stuck together and reduces the possibility of paper jams.
Note: To avoid paper jams and misfeeds, do not remove the packaging from the paper until you are ready
to use it.
Xerox
®
AltaLink
®
C8130/C8135/C8145/C8155/C8170 Series Color Multifunction Printer User Guide 213
Paper and Media

Xerox AltaLink C8130 Series Specifications

General

Brand	Xerox
Model	AltaLink C8130 Series
Category	All in One Printer
Language	English