CLEANING THE PRINTER INTERIOR
Cleaning the Printhead Lenses
The printer is constructed with four printhead lenses. The printhead lenses require regular cleaning to maintain print
quality. Clean the printhead lens every time the associated drum cartridge is replaced, or if print quality starts to
degrade. For example, if prints have voids or light streaks through one or more colors, use the following instructions
to clean the LED lenses:
WWaarrnniinngg:: If you accidentally get toner on your clothes, lightly dust them off as best as you can. If some
toner remains on your clothes, use cool water, not hot, to rinse off the toner. If toner gets on your skin,
wash it off with cool water and a mild soap. If you get toner in your eyes, wash it out immediately with
cool water and consult a doctor.
CCaauuttiioonn:: Do not perform this procedure when the printer is copying or printing.
1. Open the front door of the printer.
2. Remove the waste toner transport unit:
a. To unlock the waste toner transport unit, rotate the locking lever 45 degrees counterclockwise.
240 Xerox
®
AltaLink
®
C8130/C8135/C8145/C8155/C8170 Series Color Multifunction Printer User Guide
Maintenance
To Next Page
Loading...
Need help?
General
