REPLACING THE TRANSFER BELT CLEANER
When it is time to replace the transfer belt cleaner, a message appears on the control panel.
CCaauuttiioonn:: Do not perform this procedure when the printer is copying or printing.
1. Open the front cover of the printer.
2. Remove the waste toner transport unit:
a. To unlock the waste toner transport unit, rotate the locking lever 45 degrees counterclockwise.
Xerox
®
AltaLink
®
C8130/C8135/C8145/C8155/C8170 Series Color Multifunction Printer User Guide 259
Maintenance
To Next Page
Loading...
