SECOND BIAS TRANSFER ROLLER
Replacing the Second Bias Transfer Roller
When the second bias transfer roller needs to be replaced, a message appears on the control panel.
1. Remove paper from the left tray, then fold up the tray.
2. To open Door A, lift the release lever, then open Door A.
WWaarrnniinngg:: The area around the fuser can be hot. To avoid injury, use caution.
CCaauuttiioonn:: Do not touch the transfer belt. Touching the belt can reduce image quality or damage the
transfer belt. Do not touch the transfer roller. Touching the roller can reduce image quality.
264 Xerox
®
AltaLink
®
C8130/C8135/C8145/C8155/C8170 Series Color Multifunction Printer User Guide
Maintenance
To Next Page
Loading...
