2. Remove the hole punch waste container from its slot near the top left of the finisher.
Note:
• When you remove the hole punch waste container, wait 10 seconds before you reinsert it into the
printer. The hole punch counter resets after 10 seconds.
• If you remove the hole punch waste container before the device instructs you to, empty the container
before you reinsert it into the finisher.
3. Empty the container.
4. Insert the container all the way into the finisher.
5. Close the front door of the finisher.
RECYCLING SUPPLIES
For information on Xerox
®
supplies recycling programs, go to www.xerox.com/gwa .
Supplies include a prepaid return label. Please use it to return used components in their original boxes for recycling.
Xerox
®
AltaLink
®
C8130/C8135/C8145/C8155/C8170 Series Color Multifunction Printer User Guide 281
Maintenance
To Next Page
Loading...
