Xerox AltaLink C8130 Series User Manual

Moving the Printer
• Always power off the printer and wait for the printer to shut down. To power off the printer, verify that there are
no jobs in the queue, then press the secondary power switch. After the touch screen goes dark, wait 10 seconds,
then power off the main power switch. For details, refer to Power Options.
• Disconnect the power cord from the back of the printer.
• To avoid spilling toner, keep the printer level.
Note: When moving the printer over a long distance, to prevent toner from spilling, remove the drum
cartridges and toner cartridges. Pack the printer inside a box.
CCaauuttiioonn:: Failure to repackage the printer properly for shipment can result in damage not covered by the
Xerox
®
Warranty or Service Agreement. The Xerox
®
Warranty or Service Agreement do not cover damage
to the printer caused by improper moving.
284
Xerox
®
AltaLink
®
C8130/C8135/C8145/C8155/C8170 Series Color Multifunction Printer User Guide
Maintenance

Xerox AltaLink C8130 Series Specifications

General

Brand	Xerox
Model	AltaLink C8130 Series
Category	All in One Printer
Language	English