EasyManuals Logo
Home>Xerox>All in One Printer>AltaLink C8130 Series

Xerox AltaLink C8130 Series User Manual

Xerox AltaLink C8130 Series
420 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #287 background imageLoading...
Page #287 background image
PRINTER HAS TWO POWER SWITCHES
PPRROOBBAABBLLEE CCAAUUSSEESS SSOOLLUUTTIIOONNSS
The printer has two power switches and one is not
powered on.
Power off the printer.
Press the PPoowweerr//WWaakkee button on the control panel.
Open the front door and power off the main power
switch.
Power on the printer.
Open the front door, then power on the main
power switch.
At the printer control panel, press the PPoowweerr//WWaakkee
button. For details, refer to Power Options.
PRINTER DOES NOT POWER ON
PPRROOBBAABBLLEE CCAAUUSSEESS SSOOLLUUTTIIOONNSS
The power switch is not switched on.
Open the front door and check that the main power
switch is in the On position.
At the printer control panel, press the PPoowweerr//WWaakkee
button. For details, refer to Power Options.
The power cord is not plugged into the outlet correctly. Power off the printer, then plug the power cord into the
outlet securely. Use the bracket provided with the
printer to secure the power cord in place.
Something is wrong with the outlet connected to the
printer.
Plug another electrical appliance into the outlet
and check if it operates properly.
Try a different outlet.
The printer is connected to an outlet with a voltage or
frequency that does not match the printer
specifications.
Use a power source with the specifications listed in the
Electrical Specifications.
CCaauuttiioonn:: Plug the three-wire cord with grounding prong directly into a grounded AC outlet. Do not use a
power strip. If necessary, contact a licensed electrician to install a properly grounded outlet.
PRINTER RESETS OR POWERS OFF FREQUENTLY
PPRROOBBAABBLLEE CCAAUUSSEESS SSOOLLUUTTIIOONNSS
The power cord is not plugged into the outlet correctly. Power off the printer. Confirm that the power cord is
plugged in correctly to the printer and the outlet, then
power on the printer.
A system error occurred. Power off the printer, then power on again. If the error
persists, contact your Xerox representative.
Xerox
®
AltaLink
®
C8130/C8135/C8145/C8155/C8170 Series Color Multifunction Printer User Guide 287
Troubleshooting

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox AltaLink C8130 Series and is the answer not in the manual?

Xerox AltaLink C8130 Series Specifications

General IconGeneral
BrandXerox
ModelAltaLink C8130 Series
CategoryAll in One Printer
LanguageEnglish

Related product manuals