Clearing Jams at Area 3d in the Business Ready Finisher
1. Open the front door of the Business Ready Finisher.
2. Move lever 3d to the right.
3. Carefully remove the jammed paper.
Note: If the paper is torn, remove all torn pieces of the jammed paper from the finisher.
4. Return lever 3d to the original position, then close the front door of the Business Ready Finisher.
Xerox
®
AltaLink
®
C8130/C8135/C8145/C8155/C8170 Series Color Multifunction Printer User Guide 319
Troubleshooting
To Next Page
Loading...
