Xerox D136 User Manual

P
Paper
curl
settings on Interface Module 19-4
settings on the Interface Module
settings on the Interface Module 19-4
loading paper in the OHCF (Trays 6/7) 18-4
loading paper in Trays 1 and 2 3-2
loading paper in Trays 3 and 4 3-3
trays 1, 2, 3, and 4 3-1
Paper jams 15-1
at OHCF lever 1a and knob 1c
at OHCF lever 1b and knob 1c
at OHCF lever 1d and knob 1c
Bypass (Tray 5) 15-7
Document feeder jams 15-2
Document jams under the document
feeder belt 15-4
Duplex module 3 15-11
Duplex module3
Envelope jams in the Bypass tray 15-8
High Capacity Stacker (HCS)
E1, E2, and E3 20-5
E4, E5, and E6 20-6
E7 20-7
E8 20-8
inside the OHCF trays (A1-1 and A1-2)
Interface Module
lever 1a 19-5
lever 2a 19-6
lever 2b 19-8
Lower left cover jams 15-6
Main unit jams 15-13
OHCF
inside trays A1-1 and A1-2 18-10
lever 1a and knob 1c 18-10
lever 1b and knob 1c 18-11
lever 1d and knob 1c 18-12
SquareFold Trimmer Module 23-12
E1/E2 23-13
E3 23-15
Standard Finisher Plus
area 1 24-30
area 2 24-32
area 3 24-33
area 4
area4 24-34
areas 4b and 4c 24-28
at 2c, 2e, 2f, and 2d 24-25
at 2d and lever 2g 24-26
finisher stacker tray 22-28, 24-30
finisher top tray 22-27, 24-29
lever 1a and knob 1c 24-14
lever 1b 22-17, 24-16
lever 1d 22-16, 24-15
lever 2a and knob 3a 24-22
lever 2b and knob 2c 24-24
lever 3b and 3d 24-17
lever 3e and knob 3c 24-19
lever 3g and knob 3f 24-20
lever 4b and knob 3a 24-21
Tray 8 (Post-Process Inserter) 22-14,
24-13
Transport unit 4 15-10
Transport unit4
Trays 1-4 15-9
Paper Tray Attributes 13-6
Paper Tray Status 13-1
Perfect Binder 1-11 21-1
adjusting the printed image and trim 21-28
binder components 21-3
book binding path 21-9
bypass path 21-9
circuit breaker 21-8
cleaning the binder 21-20
control panel 21-7
cover inserter 21-5
cover inserter path 21-11
empty trimmer waste tray 21-20
external components 21-3
fault codes 21-28
general problems 21-27
internal components 21-6
loading media in the cover inserter tray
21-13
maintenance 21-20
paper jams
area E1 and area E2 21-22
area E3 21-24
area E4 21-25
area E5 and area E6 21-25
power 21-12
power interruption during operation 21-27
power saver mode 21-12
problem solving 21-22
removing books from the binder 21-14
replenishing the adhesive filling tray 21-21
specifications 21-32
standard path 21-10
Postcard bracket 18-2
using the Postcard bracket 18-2
Power Saver, See Energy Saver
Pre-drilled stock
loading in the OHCF (Trays 6/7) 18-6, 18-7
loading in Trays 1, 2, 3, and 4 3-4
Print Reports 13-2
iiiXerox
®
D95/D110/D125/D136 Copier/Printer
User Guide
Index

Xerox D136 Specifications

General

Brand	Xerox
Model	D136
Category	Copier
Language	English