Paper jams in area 2
Remedies differ according to the paper jam location. Follow the instructions displayed
to remove the jammed paper.
Tip
Always ensure that all paper jams, including any small ripped pieces of paper, are cleared
before proceeding with your print jobs. If paper is torn, check inside the Finishing
Transport and remove it.
1. Open the Finishing Transport front door.
2. Grasp the green handle 2 and gently pull down and toward the right.
3. Remove the jammed paper.
4. If necessary, rotate the green knob in the direction shown to remove any jammed
paper in this area.
5. Return the green handle 2 to its original position.
6. Close the Finishing Transport front door.
7. Ensure that the paper jam indication is cleared from the Finishing Transport status
display.
User Guide24-32
Standard Finisher Plus
To Next Page
Loading...
Need help?
General