5. While holding the tabs of a new staple cartridge, push it into the unit.
6. Push the staple cartridge unit to its original position in the machine.
7. Close the right cover on the finisher.
Note
A message will display and the machine will not operate if the right cover is open
even slightly.
Replacing the Staple Waste Container on the finisher
The machine displays a message indicating that the Staple Waste Container is full. To
replace the container:
1. Make sure that the machine has stopped printing.
2. Open the right cover on the finisher.
User Guide22-10
Standard/Booklet Maker Finisher
To Next Page
Loading...
Need help?
General