Internal components
1 Cover transport
This moves the cover sheets from the cover inserter to the binding area.
2 Bypass transport
This transport moves the cover media to the binding area; the cover media may come
either from the cover inserter tray or from the printer (network print job). If book binding
is not required, the printed output is transferred from the incoming paper path (from
the left of the Perfect Binder) directly through the binder and to the next finishing
device in line.
3 Adhesive unit
Applies adhesive to the book block in order to bind the spine of the pages together.
4 Binding area
This area binds the book block to the cover material.
5 Cutter area
This area is where the book block pages are cut/trimmed. Finished books then are
transported to the book stacker tray.
User Guide21-6
Perfect Binder (D110/D125/D136 with integrated controller)
To Next Page
Loading...
Need help?
General