DocuMate 272 Scanner User’s Guide 23
Scanning
Check the Scan Settings Before Scanning
1. To check the scan settings before scanning, press, hold down,
and then release, either the Simplex or Duplex button.
The One Touch Button Panel appears with the description of
the selected settings. This sample shows the current
description of setting 6.
The One Touch Properties window for that setting also appears
in case you want to change scanning options before scanning.
Use this window to reset the button settings for the destination
applications, file formats, and so forth. See “Configuring the
One Touch Buttons” on page 28 to reset the settings.
2. Click the close boxes on the One Touch Button Panel and the
Properties window to close them.
Press, hold down,
and then release
either button to
see the setting for
the selected LED
number.
This number corresponds
to the LED on the scanner.
The icon indicates the
Destination Application
for this setting.
The current name of the
setting.
Your document will be scanned with
these options for setting Number 6.
To Next Page
Loading...
Need help?
General