DocuMate 272 Scanner User’s Guide 65
Scanning
8. On the One Touch window, make sure that the Burn to CD
Destination Application is still selected and click the Properties
button.
The One Touch 4.0 Link Properties window appears,
9. Make sure a CD is in the CD burner.
10. Click the Burn to CD button.
The CD burner begins and your scanned documents are
written to the CD.
Scanning with Event Forwarding
If you want to specify an application to use for scanning at the start
of the process, you can use event forwarding. The scanner will
feed in the first page, but will then stop until you select the
application to use. After you select the application, its interface will
open and you can use it to continue with the scanning.
To scan with event forwarding:
1. Open the One Touch Properties window.
2. Using the arrows, choose a button to use for the event
forwarding.
To Next Page
Loading...
Need help?
General