32 6 Troubleshooting
3. Remove the tray from the printer.
4. Carefully pull out any jammed paper
remaining inside the printer.
5. Push up the button and open the front cover.
Confirm that there are no scraps of paper
remaining inside the printer.
6. Carefully remove any jammed paper in the
printer. Confirm that there are no scraps of
paper left inside.
7. Close the front cover.
8. Insert the tray into the printer and push until it
stops.
Important
• Do not use excessive force on the tray. Doing so could
damage the tray or the inside of the printer.
Paper Jams in the Paper Tray
Follow the procedure below to remove paper
jammed in the paper tray.
1. Slowly, completely remove the tray from the
printer.
2. Remove all the jammed and/or creased
paper from the tray.
To Next Page
Loading...
Need help?
General