Error Messages 41
IE
IE
Error Messages
This section describes the messages displayed on the control panel.
Messages About Consumables
Message Condition/Reason/Action
010-317
Insert Fuser
The fuser unit is not installed. Install the fuser unit.
Refer to
• User Guide Replacing the Fuser
093-NNN Check
XXX Cartridge
XXX=Yellow, Magenta, Cyan, or
Black
Sealing tape is still attached to the XXX print cartridge. Remove the sealing tape
from the displayed print cartridge.
093-NNN XXX
Cartridge Error
XXX=Yellow, Magenta, Cyan, or
Black
The XXX print cartridge is not installed correctly or is not working correctly due to
damage or malfunction. Reinstall the print cartridge.
Refer to
• User Guide Replacing the Print Cartridge
094-320
Belt Unit Error
The belt unit is not installed correctly or is not working correctly due to damage or
malfunction. Reinstall the belt unit.
Refer to
• User Guide Replacing the Belt Unit
Fuser Error
010-359
The fuser unit is not installed correctly or is not working correctly due to damage or
malfunction. Reinstall the fuser unit.
Refer to
• User Guide Replacing the Fuser
Install XXX
Print Cartridge
XXX=Yellow, Magenta, Cyan, or
Black
The XXX print cartridge is not installed. Install the XXX print cartridge.
Refer to
• User Guide Replacing the Print Cartridge
Install
Belt Unit
The belt unit is not installed. Install the belt unit.
Refer to
• User Guide Replacing the Belt Unit
Please request
Parts 010-351
Time to replace the fuser unit. Replace the old fuser unit and the old feed roller with a
new one.
Refer to
• User Guide Replacing the Fuser
• User Guide Replacing the Feed Roller
Ready to print
XXX Cartridge
Replace Soon
XXX=Yellow, Magenta, Cyan, or
Black
The XXX print cartridge is nearly empty. Purchase a new print cartridge.
Refer to
• User Guide Replacing the Print Cartridge