When Paper Jams 33
IE
IE
3. If there is jammed paper remaining inside the
printer, pull it out carefully to avoid tearing it.
4. Push up the button and open the front cover.
5. Confirm that there are no scraps of paper
remaining inside the printer.
6. Close the front cover.
7. Insert the tray into the printer, and push until
it stops.
Important
• Do not use excessive force on the tray. Doing so could
damage the tray or the inside the printer.
Paper Jams at the Fuser Unit
1. Press the button and open the front cover.
2. Lift the levers at both ends of the fuser unit,
and remove the jammed paper. If the paper
is torn, remove any scraps of paper
remaining inside the printer.
Important
• The fuser is hot. Do not touch, doing so may cause
burns.
To Next Page
Loading...
