When Paper Jams 35
IE
IE
Paper Jams in the Optional Sheet
Feeder
1. Open the trays until you find the jammed
paper.
Note
• Paper in the sheet feeder feeds to the printer from the front
of the trays, therefore paper jammed in the lower tray can
block the upper tray of the feeder or the paper tray in the
printer, preventing you from opening them. Look for the
jammed paper sequentially, starting with the lowest tray.
2. Remove all jammed and/or creased paper
from the tray.
3. Pull the jammed paper out carefully to avoid
tearing it. If the paper is torn, confirm that
there are no scraps of paper remaining
inside the printer.
4. Push up the button and open the front cover.
Confirm that there are no scraps of paper
remaining inside the printer.
5. Close the front cover.
6. Insert the trays into the printer. Push the
trays in until they stop.
Important
• Do not use excessive force on the tray. Doing so could
damage the tray or the inside the printer.
To Next Page
Loading...
Need help?
General