Banner Pages
When enabled by your System Administrator, Banner Pages include the following information:
• Job name
• Job sender
• Job recipient
• Banner Page message
• Date and Time of printing
• Number of copies
• Product name and software level/version
• Account number
• Job ID
• Server/Queue name
Error Pages
When enabled by your System Administrator, Error Pages include the following information:
• Job name
• Job sender
• Errors, Warnings
• Product name and software level/version
• Job ID
Job Attributes Report
The Job Attributes report is a summary of the job settings.
Printing an Image That Extends to the Edge of
the Page
Occasionally, you may need to print a document whose image extends beyond the edge of the page.
A document with a shaded background covering the entire page is a good example. Printing this type
of image is called a "bleed". The ability to print full bleed (edge-to-edge) used to be only available through
the use of offset printers. The Xerox Nuvera platform is not a print to edge system due to potential
image quality defects on the edge of the page. The system default is set for a 3 mm border erase. Border
erase can be customized from 0 to 6 mm for each side; Inboard, Outboard, Trail and Lead edge.
1. Select Printer and Switches.
2. On the right-side of the window, select the radio button next to Custom.
3. Change the measurements for each edge as desired.
4. Select Apply.
5. Select OK.
12-19Xerox
®
Nuvera
®
User Guide and Training Aid (UGTA)
Setting Up Complex Jobs
To Next Page
Loading...
Need help?
General