Xerox Nuvera User Manual

Document Scanner
Document Glass Scanner Setup - for systems with an integrated scanner, use to establish the position
of the Document Glass top and left registration edges, and set the scan speed of the Document Scanner.
Print Engine
For the Xerox Nuvera EA Production System, perform the following routines as needed.
• dC0604 PE Registration Setup - use to align and register the image on side 1 with the image on
side 2.
• dC0943 Corotron Cleaning Routine - use weekly to remove dust and dirt that has built up on the
corotron.
• Image Quality Setup - use if experiencing image quality problems after running the Corotron Cleaning
routine.
Print Engine A1
For the Xerox Nuvera 157/200/288/314 EA/MX Perfecting ProductionSystem, select one of the following
routines when running Print Engine A1 only. Note that Print Engine A1 is the print engine on the left,
directly following the feeder modules.
• dC0604 PE Registration Setup - use to align and register the image on side 1 with the image on
side 2.
• dC0943 Corotron Cleaning Routine - use weekly to remove dust and dirt that has built up on the
corotron.
• Image Quality Setup - use if experiencing image quality problems after running the Corotron Cleaning
routine.
Print Engine A2
For the Xerox Nuvera 157/200/288/314 EA/MX Perfecting ProductionSystem, select one of the following
routines when running Print Engine A2 only. Note that Print Engine A2 is the print engine on the right,
between Print Engine A1 and the Sheet Enhancement Module.
• dC0604 PE Registration Setup - use to align and register the image on side 2 with the image on
side 1.
• dC0943 Corotron Cleaning Routine - use weekly to remove dust and dirt that has built up on the
corotron.
• Image Quality Setup - use if experiencing image quality problems after running the Corotron Cleaning
routine.
System
For the Xerox Nuvera 157/200/288/314 EA/MX Perfecting Production System, perform the following
routines as needed.
• dC0604 PE Registration Setup - use to align and register the image on side 1 with the image on
side 2.
• dC0965 System Image Quality Xerographic Balance - use to adjust the lightness and darkness
values between the two print engines. If you notice the images output from one print engine appear
lighter than the other print engine, run this image quality matching diagnostic routine before
Xerox
®
Nuvera
®
16-6
User Guide and Training Aid (UGTA)
Maintaining Your Xerox Nuvera

Xerox Nuvera Specifications

General

Brand	Xerox
Model	Nuvera
Category	Printer
Language	English