8
Managing System Software and
Hardware
In the event you need to install a software patch or upgrade, or attach new hardware, this can be done
with the Xerox System Install Service Utility.
To access the Xerox System Install Service Utility
1. In the Xerox Nuvera user interface, click System > Software Install.
2. Choose from one of the utilities.
3. Follow on-screen instructions.
See the Xerox Nuvera online Help--accessed directly from the user interface--for details about this
utility.
4. Click Close.
To Perform Disk Overwrite
This procedure enables the System Administrator to erase sensitive data from all hard disks (for example,
the system disk and image disks). The Disk Overwrite feature is based on the current FreeFlow Print
Server data overwrite feature. The erase algorithm and patterns conform to U.S. Department of Defense
overwrite requirements.
Note
The Disk Overwrite software is on a CD included as part of the Disk Overwrite kit. Contact your System
Administrator to perform any activity related to Disk Overwrite.
Note
If you have the Solaris 11 operating system and perform the Disk Overwrite procedure, you will need to
reinstall the print server software. Since the hard drive is not partitioned, the system erases the entire
disk, including the software.
8-1Xerox
®
Nuvera
®
User Guide and Training Aid (UGTA)
To Next Page
Loading...
Need help?
General