Stacking
Allows you to enable and disable the stacker (if stackers are present with your system). It also
allows you to view and control settings for all stackers on your system.
Image Quality
Used to modify the printer darkness/IQ parameters for PostScript/PDF jobs, PCL jobs, and TIFF
jobs.
Managing Paper Trays
The Paper Trays selection allows you to manage the following operations:
• Access paper tray properties
• Set stock properties
• Enable/Disable a paper tray
• Refill a tray
• Enable/Disable cleanup
• Enable/Disable stock size checking
• Load and program a stock
For more information, see Setup Paper Trays.
Managing Finishers
The Finishing selection allows you to view the status of Internal and External Finishers.
Tip
Before running any jobs, click Printer Menu > Finishing to quickly determine what types of Finishing
devices are currently available and configured.
Note
See your System Administrator to change any settings on the Finishing window.
What Are Internal and External Finishers?
• Internal Finisher: i.e., the Stapler and Bottom Tray/Booklet Maker.
- Name: Shows the name of the device.
- Status: Indicates whether the finisher is enabled or disabled.
• External Finisher: External finishing options include any DFA compliant 3rd-party finishers that can
be attached to the printer. If the printer is not configured with an external finisher, this field is not
available.
Managing Stackers
The Stackingselection allows youto view the status of Stackers which may be configured on the system.
Tip
Before running any jobs, click Printer Menu > Stacking to quickly determine what types of Finishing
devices are currently available and configured.
Xerox
®
Nuvera
®
7-2
User Guide and Training Aid (UGTA)
Managing System Resources
To Next Page
Loading...
Need help?
General