Insertion Module - As an option, both the 4-Tray and the 2-Tray Feed Modules can be used as Insertion
Modules.
Roll Feeder - provides up to 25,000 11 x 17 inch size sheets and 5 hours of continuous run time between
roll changes.
Optional Inline Finishers - There are a number of DFA-compliant external finishers that can be installed
on a Production System. You must have a DS3500/XPS installed to add an inline finisher.
• C.P Bourg BDFNx Booklet Maker
• C.P Bourg Booklet Maker Enhanced (BMEx)
• C.P Bourg 3202 Perfect Binder
• GBC Fusion Punch 2 with Offset Stacker
• GBC AdvancedPunch Pro (hole punch)
• Xerox Manual and Book Factory
• Xerox Tape Binder
• Power Square 224 Booklet Maker
• Xerox Dual Mode Sheet Feeder (BSFEx)
• Xerox Dual Tape Binder - This configuration allows for increased productivity; especially for booklets
10 to 50 pages in length.
Licensed Features
The software options available to you depend on the licenses that were installed and enabled on your
system at installation. The following lists some of the major licenses available for the system. Check
with your System Administrator for more information on what licenses are enabled.
• Productivity Pack - when enabled, this license provides multiple print queues instead of one queue,
Stock Library management, shows all media attributes, and is required for LCDS and IPDS printing.
Also includes the ability to enter the paper weight for the stock that is being loaded.
• Enhanced Line Screen - when enabled, this license allows all valid halftones to print (85 lpi, 106 lpi,
125 lpi, 134 lpi and 156 lpi) and offers additional halftone image quality settings.
• PCL License
• Ethernet License - Bus & Tag are optional
5-3Xerox
®
Nuvera
®
User Guide and Training Aid (UGTA)
Xerox Nuvera 200/288/314 EA Perfecting Production System
To Next Page
Loading...
Need help?
General