EasyManuals Logo

Xerox Nuvera User Manual

Xerox Nuvera
294 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #173 background imageLoading...
Page #173 background image
Hint/Tip DescriptionSubtopic
A PCL job may be classified as ineligible if Resource-
Based Scheduling is enabled, the job requests a non-
default paper size (e.g. legal), and the printer default
media (e.g. letter) is not loaded. This is due to the fact
that the scheduler cannot determine the paper sizes in
the driver's Page Description Language (PDL) so it ap-
plies the queue default whenscheduling the job. Several
possible workarounds include manually releasing the
job; turning off RBS (select FIFO instead); printing using
a PostScript driver; or loading the default media in the
printer.
Similarly, a PCL job may be classified as ineligible if Re-
source-Based Scheduling is enabled, the job requests a
non-default paper size (e.g. legal), and color (e.g., blue).
This is again due to the fact that the scheduler cannot
determine the paper sizes in the PDL so it applies the
queue default when scheduling the job. In this case, the
scheduler would be looking for blueletter paper, instead
of blue legal paper. Workarounds include manually re-
leasing the job, turning off RBS, or printing using a
PostScript driver.
PCL job classified as ineligible
When printing landscape images onto short edge feed
paper and, using the following stapling or hole punch
positions with the associated driver, you will need to use
the Rotate 180 option to get the staple/hole punches
in the expected location.
PS Driver - Top Left
PCL Driver - Top Right, Bottom Right, Bottom Left, 2
StaplesRight, 2 Staples Left, HolePunchRight, and Hole
Punch Left
Print drivers and stapling positions
When printing a 2-sided, odd number of pages job from
CorelDRAW using the PCL driver, there may be an extra
blank image (page) added to the end. This blank image
will "print" on the backside of the last page unless there
is special pages programming. If the job requires special
pages programming, use the Pages to Print option and
select 1 - Number of Pages for the range to print the
job without the extra blank page at the end.
Printing from CorelDRAW with PCL driver
Printing a PDF from Adobe Reader using the Windows
2000 PS drivers may take a while to send. If the time it
takes to submit the job is too long, submit the PDF dir-
ectly using the WebUI or FreeFlow Print Manager.
Time to print a PDF
Managing Print Jobs
The Xerox Nuvera can be operated so that incoming jobs are held until an operator retrieves them at
the system and applies job programming before actually being sent to print.
14-49Xerox
®
Nuvera
®
User Guide and Training Aid (UGTA)
How Do I...

Table of Contents

Other manuals for Xerox Nuvera

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox Nuvera and is the answer not in the manual?

Xerox Nuvera Specifications

General IconGeneral
BrandXerox
ModelNuvera
CategoryPrinter
LanguageEnglish

Related product manuals