Hint/Tip DescriptionSubtopic
The only job programming settings that can be applied
to a background form are Imposition, Annotation, and
form programming. If you save the form with other
programming (such as image shift and special pages),
the Sample Background Form option will not produce
output that matches what you will see if you use the
form in an actual job.
Supported job programming
When printing a landscape document using the PCL
driver, select the opposite duplexing option from the
one you want. 2 Sided Print and 2 Sided Print, Flip on
Short Edgeare reversed. This also breaks Booklet Layout
for landscape jobs. So to print a booklet using a land-
scape job, send the job to the FreeFlow Print Server and
hold it. Program the Booklet Layout in the job properties
and release it.
Landscape duplex options reversed
The default behavior in the print drivers is to impose a
4mm margin on all four edges and some applications
scale the output to fit within that margin. This prevents
image loss due to edge cropping in the Print Engine. In
some cases, this may not be the desired behavior (for
example, when printing scannedimages, or when output
scale is critical). If the default margins are not desired,
they can be suppressed by choosing a Margins setting
of "None" in the Image Options tab in the print driver.
Suppressing default margins
Nuvera drivers do not have the XCAP import capability.
The drivers must be manually configured using the driver
properties.
Nuvera drivers and XCAP import
Printer Default values for Plex and Collation do not work
correctly. When printing to a Production system, set an
overrideon the queue for Plex and Collation, if youwant
these options to be set to something other than 1 Sided
and Collated.
Printer Default values for Plex and Collation
Xerox
®
Nuvera
®
14-48
User Guide and Training Aid (UGTA)
How Do I...
To Next Page
Loading...
