Descriptions of Billing Meters
Billing Region 1
Meter A -Represents total impressions to output destination.
Meter B -Represents total impressions for each image of job up to and including the last sheet of the
10th set.
Meter C -Total impressions for all jobs that reach a breakpoint value.
Meter D -Total impressions for all images of a job above a breakpoint value.
Meter E - Total impressions printed on sheets wider than 16 " (Nuvera Xerox Nuvera 200/288 EA/MX
Perfecting Production System only)
Billing Region 2
Meter 1 -Total impressions to output destination.
Meter 2 -Total impressions printed on sheets wider than 16 ".
Meter 3 -Total impressions for sets 11-18.
Meter 4 -Total impressions for set 19.
Meter 5 -Total impressions for all jobs that reach a breakpoint value.
Meter 6 - Total impressions for all images of a job above a breakpoint value.
Billing Region 3
Meter A -Represents total impressions to output destination.
Meter B -Total impressions for all jobs that reach a breakpoint value.
Meter C -Total impressions for all images of a job above a breakpoint value.
Meter D - Total impressions printed on sheets wider than 16" (Xerox Nuvera 200/288 EA/MX Perfecting
Production System only)
Billing Region 4
Meter 1 -Represents total impressions to output destination.
Meter 2 -Total impressions for each image of a job up to and including the last sheet of the 10th set.
Meter 3 -Total impressions printed on sheets wider than 16 " (Xerox Nuvera 200/288 EA/MX Perfecting
Production System only).
7-7Xerox
®
Nuvera
®
User Guide and Training Aid (UGTA)
Managing System Resources
To Next Page
Loading...
