Xerox PHASER 3125 User Manual

General Procedures and Information
PHASER 3124 / PHASER 3125 09/06 6-7
• System temperature settings
Stand by : 160 +/- 5°C
Printing: 180 +/- 5°C (before 30pages), 75 +/- 5°C (after 30pages)
Overshoot : 200°C or less
Overheat : 210°C or less
4. Heat roller
• Length : 254 mm (10 inches)
• Valid length : 222 mm (8.74 inches)
• GND Type : Heat roller bearing fuser frame grounding
5. Pressure roller
• Shaft
Length : 239.5 mm (9.43 inches)
• Rubber
Length : 222 mm (8.74 inches)
6. Paper separation method
• Teflon coating with moulded claw system
7. Safety Features
• To prevent overheating
1st protection device: Hardware stops working when printer is overheated
2nd protection device: Software system stops when printer is overheated
3rd protection device: Thermostat cuts off power to the lamp.
• Safety device
The fuser power is cut-off when the front cover is open.
The overheating safety device for customer

Xerox PHASER 3125 Specifications

General

Color	No
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	9 s
Print speed (black, normal quality, A4/US Letter)	25 ppm
Internal memory	32 MB
Sound power level (standby)	35 dB
Sound pressure level (printing)	53 dB
Total input capacity	250 sheets
Total output capacity	100 sheets
Paper tray media types	Envelopes, Labels, Plain paper, Transparencies
ISO A-series sizes (A0...A9)	A4
Power requirements	220 – 240 V, 50/60 Hz
Power consumption (standby)	70 W
Power consumption (printing)	400 W
Power consumption (PowerSave)	8.5 W
Operating temperature (T-T)	10 - 32 °C
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Dimensions (WxDxH)	358 x 298 x 253 mm