Xerox PHASER 3125 User Manual

Status Indicator RAPs
2-10 09/06 PHASER 3124 / PHASER 3125
6 Fuser Jam RAP
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer supply
while performing tasks that do not need electricity. Electricity can cause death or injury. Moving
parts can cause injury.
Description
Paper is jammed in the fuser.
Check and Cause Solution
1. Clear any paper jams in the machine. 1. Refer to clearing paper jams, GP 6.
2. Contamination of the pressure roller or heat
roller, PL 3.
11.
2. Disassemble the fuser, REP 13. Clean the
surface of the rollers with IPA (Isopropyl Alco-
hol) or water.
3. Damaged stripper fingers, PL 3. 3. If there is a dark background on the docu-
ment, refer to IQ 8.
Check the stripper fingers, PL 3.
Install a new fuser, PL 3 if necessary.

Xerox PHASER 3125 Specifications

General

Color	No
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	9 s
Print speed (black, normal quality, A4/US Letter)	25 ppm
Internal memory	32 MB
Sound power level (standby)	35 dB
Sound pressure level (printing)	53 dB
Total input capacity	250 sheets
Total output capacity	100 sheets
Paper tray media types	Envelopes, Labels, Plain paper, Transparencies
ISO A-series sizes (A0...A9)	A4
Power requirements	220 – 240 V, 50/60 Hz
Power consumption (standby)	70 W
Power consumption (printing)	400 W
Power consumption (PowerSave)	8.5 W
Operating temperature (T-T)	10 - 32 °C
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Dimensions (WxDxH)	358 x 298 x 253 mm