Xerox PHASER 3125 User Manual

Image Quality
PHASER 3124 / PHASER 3125 09/06 3-7
IQ 5 Light image
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer supply
while performing tasks that do not need electricity. Electricity can cause death or injury. Moving
parts can cause injury.
Description
The printed image is light.
Checks and Causes Solutions
1. Toner save mode is enabled. 1. Ensure the toner save mode is
off by using the software applica-
tion. Check the printer and driver
settings.
Clean the toner cartridge, PL 1 if
contaminated.
2. Ambient temperature is below
10°C.
2. Turn the machine on and wait for
30 minutes before using it.
3. Bad contacts on the toner car-
tridge caused by contamination.
3. Install a new toner cartridge, PL
1.
4. Check the HVPS, PL 1. 4. If necessary, install a new HVPS,
PL 1.

Xerox PHASER 3125 Specifications

General

Color	No
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	9 s
Print speed (black, normal quality, A4/US Letter)	25 ppm
Internal memory	32 MB
Sound power level (standby)	35 dB
Sound pressure level (printing)	53 dB
Total input capacity	250 sheets
Total output capacity	100 sheets
Paper tray media types	Envelopes, Labels, Plain paper, Transparencies
ISO A-series sizes (A0...A9)	A4
Power requirements	220 – 240 V, 50/60 Hz
Power consumption (standby)	70 W
Power consumption (printing)	400 W
Power consumption (PowerSave)	8.5 W
Operating temperature (T-T)	10 - 32 °C
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Dimensions (WxDxH)	358 x 298 x 253 mm