Xerox PHASER 3125 User Manual

Image Quality
3-16 09/06 PHASER 3124 / PHASER 3125
IQ 14 Contamination on the Back of Page.
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer supply
while performing tasks that do not need electricity. Electricity can cause death or injury. Moving
parts can cause injury.
Description
The back of the page is stained at 47 mm intervals.
Checks and Causes Solutions
1. The transfer roller, PL 4 is con-
taminated.
1. Check and install a new transfer
roller, PL 4 if contaminated
severely.
2. The pressure roller, PL 3 is con-
taminated.
2. Disassemble the fuser, REP 7
and clean the heat roller and pres-
sure roller, PL 3.Clean the area
between the heat roller and Ther-
mistor, PL 3.
CAUTION
Take care not to deform the heat
roller.

Xerox PHASER 3125 Specifications

General

Color	No
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	9 s
Print speed (black, normal quality, A4/US Letter)	25 ppm
Internal memory	32 MB
Sound power level (standby)	35 dB
Sound pressure level (printing)	53 dB
Total input capacity	250 sheets
Total output capacity	100 sheets
Paper tray media types	Envelopes, Labels, Plain paper, Transparencies
ISO A-series sizes (A0...A9)	A4
Power requirements	220 – 240 V, 50/60 Hz
Power consumption (standby)	70 W
Power consumption (printing)	400 W
Power consumption (PowerSave)	8.5 W
Operating temperature (T-T)	10 - 32 °C
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Dimensions (WxDxH)	358 x 298 x 253 mm