Xerox PHASER 3125 User Manual

Image Quality
PHASER 3124 / PHASER 3125 09/06 3-11
IQ 9 Ghost (1)
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer supply
while performing tasks that do not need electricity. Electricity can cause death or injury. Moving
parts can cause injury.
Description
Ghost occurs at 75.5 mm (3 inches) intervals of the OPC drum on the print.
Checks and Causes Solutions
1. Abnormal low temperature (below
10°C).
1. Turn the printer on and wait for
60 minutes before using the
machine.
2. The life of toner cartridge, PL 1 has
expired, refer to GP 4.
2. Install a new toner cartridge, PL
1.
3. The transfer roller, PL 4 has expired,
refer to GP 4.
3. Check and install a new transfer
roller, PL 4 if necessary.
4. Bad contacts due to contamination
of the terminals, PL 1 and the toner
cartridge contacts, PL 1, caused by
toner particles.
4. Clean the following parts:
• Toner cartridge contacts, PL 1.
• Terminals, PL 1.
Install new parts as necessary:
• Toner Cartridge, PL 1.
• HVPS, PL 1.
5. Bad contacts due to contamination
of the terminals, PL 1 and the HVPS,
PL 1, caused by toner particles.
5. Clean the HVPS contact termi-
nals, PL 1. If the problem persists,
install a new HVPS, PL 1.

Xerox PHASER 3125 Specifications

General

Color	No
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	9 s
Print speed (black, normal quality, A4/US Letter)	25 ppm
Internal memory	32 MB
Sound power level (standby)	35 dB
Sound pressure level (printing)	53 dB
Total input capacity	250 sheets
Total output capacity	100 sheets
Paper tray media types	Envelopes, Labels, Plain paper, Transparencies
ISO A-series sizes (A0...A9)	A4
Power requirements	220 – 240 V, 50/60 Hz
Power consumption (standby)	70 W
Power consumption (printing)	400 W
Power consumption (PowerSave)	8.5 W
Operating temperature (T-T)	10 - 32 °C
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Dimensions (WxDxH)	358 x 298 x 253 mm