Xerox PHASER 3125 User Manual

Status Indicator RAPs
PHASER 3124 / PHASER 3125 09/06 2-5
2. Check the installation environment.
• Ensure the installation surface is flat, level and free from vibration.
If necessary, move the machine.
• Ensure that the temperature and humidity of the surroundings are within specification
If necessary, move the machine.
• Ensure that the machine is positioned away from any air conditioning or other heating or cool-
ing equipment. Also ensure that it is not positioned in a direct draft from any air conditioning,
fan or open window.
If necessary, move the machine.
• Ensure the machine is not positioned in direct sunlight.
If unavoidable, use a curtain to shade the machine.
• Ensure the machine is installed in a clean dust free environment.
Move the machine to a clean area if necessary.
• Some industrial or cleaning processes give of fumes which can affect the machine.
Move the machine away from this type of air pollution
3. Check the paper type.
• Only use paper which is of suitable quality, weight and size.
See the user guide.
4. Check the overall condition of the machine
• Clean the paper transport areas.
Any rollers with dirt surfaces should be cleaned. If necessary, install new rollers.

Xerox PHASER 3125 Specifications

General

Color	No
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	9 s
Print speed (black, normal quality, A4/US Letter)	25 ppm
Internal memory	32 MB
Sound power level (standby)	35 dB
Sound pressure level (printing)	53 dB
Total input capacity	250 sheets
Total output capacity	100 sheets
Paper tray media types	Envelopes, Labels, Plain paper, Transparencies
ISO A-series sizes (A0...A9)	A4
Power requirements	220 – 240 V, 50/60 Hz
Power consumption (standby)	70 W
Power consumption (printing)	400 W
Power consumption (PowerSave)	8.5 W
Operating temperature (T-T)	10 - 32 °C
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Dimensions (WxDxH)	358 x 298 x 253 mm