Xerox PHASER 3125 User Manual

Status Indicator RAPs
2-12 09/06 PHASER 3124 / PHASER 3125
8 LED blinking fault RAP
8A Fuser error
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer supply
while performing tasks that do not need electricity. Electricity can cause death or injury. Moving
parts can cause injury.
Description
All the LEDs on the operator panel are blinking.
8B Scan error
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer supply
while performing tasks that do not need electricity. Electricity can cause death or injury. Moving
parts can cause injury.
Description
1. All LED’s on the OPE panel are blinking.
Check and Cause Solution
1. The fuser gear, PL 3 has melted 1. Refer to RAP 9.
2.The thermistor, PL 3 is damaged 2. Check and install a new thermistor, PL 3 if
necessary.
3. The halogen lamp, PL 3 may be defective. 3.Check and install a new halogen lamp, PL 3
if necessary.
4.The thermostat, PL 3 is damaged. 4. Check and install new parts as necessary:
• Thermostat, PL 3
• Fuser assembly, PL 1
Check and Cause Solution
1. The LSU may be defective, PL 1.
1. Check and install a new LSU, PL 1 if nec-
essary.

Xerox PHASER 3125 Specifications

General

Color	No
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	9 s
Print speed (black, normal quality, A4/US Letter)	25 ppm
Internal memory	32 MB
Sound power level (standby)	35 dB
Sound pressure level (printing)	53 dB
Total input capacity	250 sheets
Total output capacity	100 sheets
Paper tray media types	Envelopes, Labels, Plain paper, Transparencies
ISO A-series sizes (A0...A9)	A4
Power requirements	220 – 240 V, 50/60 Hz
Power consumption (standby)	70 W
Power consumption (printing)	400 W
Power consumption (PowerSave)	8.5 W
Operating temperature (T-T)	10 - 32 °C
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Dimensions (WxDxH)	358 x 298 x 253 mm