Xerox Phaser 7100 User Manual

Paper and Media
Phaser 7100 Color Printer 45
User Guide
Note: To avoid jams and misfeeds, do not remove paper from its packaging until you are ready to
use it.
6. Load the paper in the tray:
With Duplex Unit Without Duplex Unit
Insert the paper long-edge feed, with the print side face
down and the top edge to the right. Load hole punched
paper with the holes facing the front of the tray.
Insert the paper long-edge feed, with the print side face
up and the top edge to the right. Load hole punched
paper with the holes toward the back.
Insert large-format paper short-edge feed, with the print
side face down and the top edge facing the front of the
tray. Load hole punched paper with the holes to the left.
Insert large-format paper short-edge feed, with the print
side face up and the top edge facing the back of the
tray. Load hole punched paper with the holes to the left.
Notes:
• Do not load paper above the maximum fill line. Overfilling the tray can cause the printer to
jam.
• For faster print speeds, load paper long-edge feed.
7. If previously removed, reinsert the tray into the printer.

Xerox Phaser 7100 Specifications

General

Maximum Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 52, 000 pages
Processor	667 MHz
Memory (Standard)	256 MB
Paper Input Capacity (Maximum)	2, 050 sheets
Paper Output Capacity	250 sheets
Duplex Printing	Automatic
Type	Color Laser Printer
Operating System Compatibility	Windows, Mac OS, Linux
Connectivity	USB 2.0, Ethernet
Supported Media Sizes	A4, A5, B5, Letter, Legal
First Page Out (Black)	9 seconds
First Page Out (Color)	9 seconds
Print Languages	PCL 6, PostScript 3
Network Connectivity	Ethernet
Print Speed	Up to 30 ppm